Dallas, TX · Pool Safety Fencing
Steel and ornamental iron pool enclosures that pass inspection the first time — correct height, picket spacing, gate swing and self-latching hardware, installed across Dallas–Fort Worth.
$42–$75 per linear foot installed, gate included

Residential pool barriers are required to be at least 48 inches tall measured from the outside grade, with no gaps a 4-inch sphere can pass through. We build to that spec by default and confirm the current requirement with your city before fabrication.
Yes. Any gate in the barrier has to be self-closing and self-latching, swing away from the pool, and have the release mounted high enough that a small child cannot reach it. That hardware is included in every pool quote.
Yes, and it is often cheaper. A pool-only enclosure is a shorter run than a full perimeter and still satisfies the barrier requirement. We price both so you can compare.
We hot-dip or zinc-prime the steel and powder-coat it, which holds up far better around chlorine and constant sprinkler contact than a painted finish.
Crews run daily out of Dallas. Tell us the address and we'll measure the run, check the property line and send a fixed-price quote.
Free measured estimate
Send your address — pricing back within 48 hours.